Home > About > Readers Guide > Service Guide

ReturnInstructions for Self-service Borrowing & Return

Self-service borrowing & return machines are put into use from 16th Nov. 2015 by University Town Library, here comes the operation instructions.

Self-service Borrowing

  1. Put down your books to the sensor area of the screen, get your cards into the card reader or at the sensor area (according to the type of your card). The cards cannot be taken away from the card reader or the sensor area during operation.
  2. Type down the password of “My Library” (the default password is your 8-bit birth date number.).
  3. Verify your personal information.
  4. Count the books, adjust the books for “Re-checking” until the book amount given by the machine is correct, then click “Confirm”.
  5. Click “Finish” when the list of borrowed books is presented on the screen ().

 

 

Self-service return:

  1. Put down the books to the sensor area(Reader cards are not needs for return)
  2. Count the books, adjust the books for “Re-checking” until the book amount given by the machine is correct, then click “Affirm”.
  3. Click “Finish” when the return list is shown on the screen.

Self-checking & self-renewal

1. Get your cards into the card reader or at the sensor area (according to the type of your card)

2. Type in the password of “My Library” (the default password is your 8-bit birth date number.).

3. Click “Renewal” when the information for borrowed books will be shown on the screen,.

Note: you may go to service counter for manual service if the self-borrowing & return machines cannot process your reader card (old version) or books.